Bay View Display Assembly Instructions

Below are the rack assembly instructions. Please follow them accordingly. You can also download the instructions using the link below

Bay View Display Assembly Instructions
Bayview Display Dimensions

Flooring Display Rack

Parts List:

  • 2 Leg Frames
  • 1 Rear Support Frame
  • 1 Grid Frame
  • 2 Support Arms
  • 6 Joint Connector Bolt Assembly
  • 6 1″ x 2″ Tube End Cap
  • 4 1/4″ Washers
  • 2 Short Joint Connector Bolt Assembly

Rack Assembly Instructions

1.) Use 4 Joint Connector Bolt Assembly pieces (2 per side) to connect Rear Support Frame to Leg Frames. Place 1 Joint Connector through 2nd hole on Leg Frame add on one 1/4″ washer and insert through top hole on Rear Support Frame on each side of rack. Place remaining 2 Joint Connectors through 3rd hole on Leg Frames and 2nd hole on Rear Support Frame. See point A.

2.) Using 2 (one per side) Joint Connector Bolt Assembly pieces to connect Grid Frame to top of Leg Assembly on each side. Place Joint Connector Bolt Assembly through 1st hole on each leg Frame add on one 1/4″ washer and insert through top hole on Grid Frame. See point B.

3.) Use 2Joint Connector Bolt Assembly Pieces (one per side) and 2 short Joint Bolt Assembly Pieces (one per side) to connect support arms on each side. Go through 3rd hole on Leg Frame and 2nd hole on Grid Frame and use Joint Connector Bolt Assembly. Use Short Joint Connector Bolt Assembly pieces for attaching front of Support Arm to Grid Frame. See point C.

4.) Place Plastic Tube End Caps on top and bottom of Leg Frames and on front of Support Arms. See point D. Place the Place the remaining 2 on back of Grid Frame.

5.) Place 1/2″ wood sheet on top of shelf to hold product.